- First you need to know the IP address of the PC with Neostampa. Open Command Prompt and type ipconfig.
- Then, in that same PC, open Neocontrol and check the port number in the URL bar right after the local IP address 127.0.01. Most of times it is 9098 but this may be different.
- Verify all neoControl PCs are opened to incoming connections, there are no firewall or network settings blocking them.
- Then go to another PC in the network, open the web browser and type the IP address you got from cmd followed by the port number, like this: IP address:port
At that moment neoControl main menu should be displayed.